Amalite Acrylic Sealer is a state-of-the-art, water-based, non-toxic sealer utilising the latest
acrylic blends and nanotechnology.
Amalite Acrylic Sealer is a state-of-the-art, water-based, non-toxic sealer utilising the latest
acrylic blends and nanotechnology. Designed for the CCL 110 Light, CCL 111, CCL 222 and CL
333 range of products, this sealer provides a slight sheen, enhances water resistance, and
increases the impact resistance of your surfaces
● A state-of-the-art, water-based, non-toxic sealer.
● Utilises the latest acrylic blends and nanotechnology.
● Designed for the CL 110 Light 222333 range of products.
● Provides a slight sheen, enhances water resistance, and increases impact resistance.
● Available in 250 gram containers.
● Appearance: Clear, glossy
● Viscosity: Medium
● Specific Gravity: ~1.0
● pH: Neutral
● Solids Content: Approximately 50%
● Drying Time: Surface dry in 1 hour, fully cured in 24 hours
● Slight sheen
● Enhanced water resistance
● Increased impact resistance
● Deep penetration with initial coats
● Durable protection
● Easy application
● Store in a cool, dry place away from direct sunlight and sources of heat.
● Keep container tightly closed when not in use.
● Shelf Life: 12 months from the date of manufacture if stored in the original, unopened
container.
● Keep out of reach of children.
● Use in a well-ventilated area.
● Avoid contact with skin and eyes. In case of contact, rinse thoroughly with water
● Wear protective gloves and eyewear during application.
● Slight Sheen: Provides a subtle, attractive finish.
● Enhanced Water Resistance: Protects surfaces from moisture and water damage
● Deep Penetration: Initial diluted coats penetrate deeply into substrates.
● Durable Protection: Ensures long-lasting protection for various surfaces.
● Easy Application: User-friendly formulation allows for simple and smooth application.
Ensure the surface is clean, dry, and free from dust, grease, and other contaminants.
Stir the sealer thoroughly before use to ensure a uniform consistency.
Apply using a brush, roller, or spray. For best results, apply thin, even coats. Allow the first coat to dry for at least 1 hour before applying additional coats
The sealer will be surface dry in approximately 1 hour. Allow 24 hours for the sealer to fully cure.
Clean tools and equipment with warm, soapy water immediately after use.
Designers and artists around the world, architects and model makers are using a product known as Jesmonite, a very popular and trending pourable composite material. With unlimited applications Jesmonite was” product of the year” in the year 2016.
Designers and artists around the world, architects and model makers are using a product known as Jesmonite, a very popular and trending pourable composite material. With unlimited applications Jesmonite was” product of the year” in the year 2016.
Question or feedback?
We’d love to hear from you.
Question or feedback?
We’d love to hear from you.
